Configuration Parameter Reference

Here are some common configuration properties that you can customize. For more information on setting properties, see Configure ksqlDB Server and Configure ksqlDB CLI.

Tip

Each property has a corresponding environment variable in the Docker image for ksqlDB Server. The environment variable name is constructed from the configuration property name by converting to uppercase, replacing periods with underscores, and prepending with KSQL_. For example, the name of the ksql.service.id environment variable is KSQL_KSQL_SERVICE_ID. For more information, see Install ksqlDB with Docker.

Kafka Streams and Kafka Client Settings

These configurations control how Kafka Streams executes queries. These configurations can be specified via the ksql-server.properties file or via SET in a ksqlDB CLI. These can be provided with the optional ksql.streams. prefix.

Important

Although you can use either prefixed (ksql.streams.) or un-prefixed settings, we recommend that you use prefixed settings.

ksql.streams.auto.offset.reset

Determines what to do when there is no initial offset in Apache Kafka® or if the current offset doesn't exist on the server. The default value in ksqlDB is latest, which means all Kafka topics are read from the latest available offset. For example, to change it to earliest by using the ksqlDB CLI:

SET 'auto.offset.reset'='earliest';

For more information, see Kafka Consumer and AUTO_OFFSET_RESET_CONFIG.

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_STREAMS_AUTO_OFFSET_RESET.

ksql.streams.bootstrap.servers

A list of host and port pairs that is used for establishing the initial connection to the Kafka cluster. This list should be in the form host1:port1,host2:port2,... The default value in ksqlDB is localhost:9092. For example, to change it to 9095 by using the ksqlDB CLI:

SET 'bootstrap.servers'='localhost:9095';

For more information, see Streams parameter reference and BOOTSTRAP_SERVERS_CONFIG.

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_STREAMS_BOOTSTRAP_SERVERS or KSQL_BOOTSTRAP_SERVERS. For more information, see Install ksqlDB with Docker.

ksql.streams.commit.interval.ms

The frequency to save the position of the processor. The default value in ksqlDB is 2000. Here is an example to change the value to 5000 by using the ksqlDB CLI:

SET 'commit.interval.ms'='5000';

For more information, see the Streams parameter reference and COMMIT_INTERVAL_MS_CONFIG,

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_STREAMS_COMMIT_INTERVAL_MS.

ksql.streams.cache.max.bytes.buffering

The maximum number of memory bytes to be used for buffering across all threads. The default value in ksqlDB is 10000000 (~ 10 MB). Here is an example to change the value to 20000000 by using the ksqlDB CLI:

SET 'cache.max.bytes.buffering'='20000000';

For more information, see the Streams parameter reference and CACHE_MAX_BYTES_BUFFERING_CONFIG.

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_STREAMS_CACHE_MAX_BYTES_BUFFERING.

ksql.streams.num.stream.threads

This number of stream threads in an instance of the Kafka Streams application. The stream processing code runs in these threads. For more information about the Kafka Streams threading model, see Threading Model.

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_STREAMS_NUM_STREAM_THREADS.

ksql.streams.processing.guarantee

The processing semantics to use for persistent queries. The default is at_least_once. To enable exactly-once semantics, use exactly_once.

For more information, see Processing Guarantees.

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_STREAMS_PROCESSING_GUARANTEE.

ksql.output.topic.name.prefix

The default prefix for automatically created topic names. Unless a user defines an explicit topic name in a SQL statement, ksqlDB prepends the value of ksql.output.topic.name.prefix to the names of automatically created output topics. For example, you might use "ksql-interactive-" to name output topics in a ksqlDB Server cluster that's deployed in interactive mode. For more information, see Interactive ksqlDB clusters.

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_OUTPUT_TOPIC_NAME_PREFIX.

response.http.headers.config

Use to select which HTTP headers are returned in the HTTP response for Confluent Platform components. Specify multiple values in a comma-separated string using the format [action][header name]:[header value] where [action] is one of the following: set, add, setDate, or addDate. You must use quotation marks around the header value when the header value contains commas, for example:

response.http.headers.config="add Cache-Control: no-cache, no-store, must-revalidate", add X-XSS-Protection: 1; mode=block, add Strict-Transport-Security: max-age=31536000; includeSubDomains, add X-Content-Type-Options: nosniff  

The corresponding environment variable in the ksqlDB Server image is KSQL_RESPONSE_HTTP_HEADERS_CONFIG.

ksqlDB Query Settings

These configurations control how ksqlDB executes queries. These configurations can be specified via the ksql-server.properties file or via SET in ksqlDB CLI, for example, ksql.service.id and ksql.persistent.prefix.

ksql.fail.on.deserialization.error

Indicates whether to fail if corrupt messages are read. ksqlDB decodes messages at runtime when reading from a Kafka topic. The decoding that ksqlDB uses depends on what's defined in STREAM's or TABLE's data definition as the data format for the topic. If a message in the topic can't be decoded according to that data format, ksqlDB considers this message to be corrupt.

For example, a message is corrupt if ksqlDB expects message values to be in JSON format, but it's in DELIMITED format instead. The default value in ksqlDB is false, which means a corrupt message results in a log entry, and ksqlDB continues processing. To change this default behavior and instead have Kafka Streams threads shut down when corrupt messages are encountered, add the following setting to your ksqlDB Server properties file:

ksql.fail.on.deserialization.error=true

ksql.fail.on.production.error

Indicates whether to fail if ksqlDB fails to publish a record to an output topic due to a Kafka producer exception. The default value in ksqlDB is true, which means if a producer error occurs, then the Kafka Streams thread that encountered the error will shut down. To log the error message to the Processing Log and have ksqlDB continue processing as normal, add the following setting to your ksqlDB Server properties file:

ksql.fail.on.production.error=false

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_FAIL_ON_DESERIALIZATION_ERROR.

ksql.schema.registry.url

The Schema Registry URL path to connect ksqlDB to. To communicate with Schema Registry over a secure connection, see Configure ksqlDB for Secured Confluent Schema Registry.

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_SCHEMA_REGISTRY_URL.

ksql.service.id

The service ID of the ksqlDB server. This is used to define the ksqlDB cluster membership of a ksqlDB Server instance.

• If multiple ksqlDB servers connect to the same Kafka cluster (i.e. the same bootstrap.servers and the same ksql.service.id) they form a ksqlDB cluster and share the workload.

• If multiple ksqlDB servers connect to the same Kafka cluster but don't have the same ksql.service.id, they each get a different command topic and form separate ksqlDB clusters, by ksql.service.id.

By default, the service ID of ksqlDB servers is default_. The service ID is also used as the prefix for the internal topics created by ksqlDB. Using the default value ksql.service.id, the ksqlDB internal topics will be prefixed as _confluent-ksql-default_. For example, _command_topic becomes _confluent-ksql-default__command_topic).

Important

By convention, the ksql.service.id property should end with a separator character of some form, like a dash or underscore, as this makes the internal topic names easier to read.

ksql.internal.topic.replicas

The number of replicas for the internal topics created by ksqlDB Server. The default is 1. Replicas for the record processing log topic should be configured separately. For more information, see Processing Log.

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_INTERNAL_TOPIC_REPLICAS.

ksql.sink.partitions (Deprecated)

The default number of partitions for the topics created by ksqlDB. The default is four. This property has been deprecated. For more info see the WITH clause properties in CREATE STREAM AS SELECT and CREATE TABLE AS SELECT.

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_SINK_PARTITIONS.

ksql.sink.replicas (Deprecated)

The default number of replicas for the topics created by ksqlDB. The default is one. This property has been deprecated. For more info see the WITH clause properties in CREATE STREAM AS SELECT and CREATE TABLE AS SELECT.

ksql.functions.substring.legacy.args

Controls the semantics of the SUBSTRING UDF. Refer to the SUBSTRING documentation in the function guide for details.

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_FUNCTIONS_SUBSTRING_LEGACY_ARGS.

ksql.persistence.wrap.single.values

Sets the default value for the WRAP_SINGLE_VALUE property if one is not supplied explicitly in CREATE TABLE, CREATE STREAM, CREATE TABLE AS SELECT or CREATE STREAM AS SELECT statements.

When set to the default value, true, ksqlDB serializes the column value nested with a JSON object, Avro record, or Protobuf message, depending on the format in use. When set to false, ksqlDB persists the column value without any nesting.

For example, consider the statement:

CREATE STREAM y AS SELECT f0 FROM x EMIT CHANGES;

The statement selects a single field as the value of stream y. If f0 has the integer value 10, with ksql.persistence.wrap.single.values set to true, the JSON format persists the value within a JSON object, as it would if the value had more fields:

{
   "F0": 10
}

With ksql.persistence.wrap.single.values set to false, the JSON format persists the single field's value as a JSON number: 10.

10

The AVRO and PROTOBUF formats support the same properties. The properties control whether or not the field's value is written as a named field within a record or as an anonymous value.

This setting can be toggled using the SET command

SET 'ksql.persistence.wrap.single.values'='false';

For more information, refer to the CREATE TABLE, CREATE STREAM, CREATE TABLE AS SELECT or CREATE STREAM AS SELECT statements.

Note

The DELIMITED format is not affected by the ksql.persistence.ensure.value.is.struct setting, because it has no concept of an outer record or structure.

ksql.query.pull.enable.standby.reads

Config to enable/disable forwarding pull queries to standby hosts when the active is dead. This means that stale values may be returned for these queries since standby hosts receive updates from the changelog topic (to which the active writes to) asynchronously. Turning on this configuration, effectively sacrifices consistency for higher availability.

Setting to true guarantees high availability for pull queries. If set to false, pull queries will fail when the active is dead and until a new active is elected. Default value is false.

For using this functionality, the server must be configured with ksql.streams.num.standby.replicas >= 1, so standbys are actually enabled for the underlying Kafka Streams topologies. We also recommend ksql.heartbeat.enable=true, to ensure pull queries quickly route around dead/failed servers, without wastefully attempting to open connections to it (which can be slow & resource in-efficient).

ksql.query.pull.max.allowed.offset.lag

Config to control the maximum lag tolerated by a pull query against a table, expressed as the number of messages a given table-partition is behind, compared to the changelog topic. This is applied to all servers, both active and standbys included. This can be overridden per query, from the CLI (using SET command) or the pull query REST endpoint (by including it in the request e.g: "streamsProperties": {"ksql.query.pull.max.allowed.offset.lag": "100"}).

By default, any amount of lag is allowed. For using this functionality, the server must be configured with ksql.heartbeat.enable=true and ksql.lag.reporting.enable=true, so the servers can exchange lag information between themselves ahead of time, to validate pull queries against the allowed lag.

ksqlDB Server Settings

These configurations control the general behavior of ksqlDB Server. These configurations can only be specified via the ksql-server.properties file.

Important

ksqlDB Server configuration settings take precedence over those set in the ksqlDB CLI. For example, if a value for ksql.streams.replication.factor is set in both ksqlDB Server and ksqlDB CLI, the ksqlDB Server value is used.

ksql.query.persistent.active.limit

The maximum number of persistent queries that may be running at any given time. Applies to interactive mode only. Once the limit is reached, commands that try to start additional persistent queries will be rejected. Users may terminate existing queries before attempting to start new ones to avoid hitting the limit. The default is no limit.

When setting up ksqlDB servers, it may be desirable to configure this limit to prevent users from overloading the server with too many queries, since throughput suffers as more queries are run simultaneously, and also because there is some small CPU overhead associated with starting each new query. For more information, see Sizing Recommendations.

ksql.queries.file

A file that specifies a predefined set of queries for the ksqlDB cluster. For an example, see Non-interactive (Headless) ksqlDB Usage.

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_QUERIES_FILE.

listeners

The listeners setting controls the REST API endpoint for the ksqlDB Server. For more info, see ksqlDB REST API Reference.

The default listeners is http://0.0.0.0:8088, which binds to all IPv4 interfaces. Set listeners to http://[::]:8088 to bind to all IPv6 interfaces. Update this to a specific interface to bind only to a single interface. For example:

# Bind to all IPv4 interfaces.
listeners=http://0.0.0.0:8088

# Bind to all IPv6 interfaces.
listeners=http://[::]:8088

# Bind only to localhost.
listeners=http://localhost:8088

# Bind to specific hostname or ip.
listeners=http://server1245:8088

You can configure ksqlDB Server to use HTTPS. For more information, see Configure ksqlDB for HTTPS.

The corresponding environment variable in the ksqlDB Server image is KSQL_LISTENERS.

ksql.internal.listener

The ksql.internal.listener setting controls the address bound for use by internal, intra-cluster communication.

If not set, the internal listener defaults to the first listener defined by listeners.

This setting is most often useful in a IaaS environment to separate external-facing traffic from internal traffic.

ksql.advertised.listener

This is the URL used for inter-node communication. Unlike listeners or ksql.internal.listener, this configuration doesn't create a listener. Instead, it is used to set an externally routable URL that other ksqlDB nodes will use to communicate with this node. It only needs to be set if the internal listener is not externally resolvable or routable.

If not set, the default behavior is to use the internal listener, which is controlled by ksql.internal.listener.

If ksql.internal.listener resolves to a URL that uses localhost, a wildcard IP address, like 0.0.0.0, or a hostname that other ksqlDB nodes either can't resolve or can't route requests to, set ksql.advertised.listeners to a URL that ksqlDB nodes can resolve.

For more information, see Configuring Listeners of a ksqlDB Cluster

ksql.metrics.tags.custom

A list of tags to be included with emitted JMX metrics, formatted as a string of key:value pairs separated by commas. For example, key1:value1,key2:value2.

ksql.streams.state.dir

Sets the storage directory for stateful operations, like aggregations and joins, to a durable location. By default, state is stored in the /tmp/kafka-streams directory.

Note

The state storage directory must be unique for every server running on the machine. Otherwise, servers may appear to be stuck and not doing any work.

The corresponding environment variable in the ksqlDB Server image is KSQL_KSQL_STREAMS_STATE_DIR.

Confluent Control Center Settings

You can access ksqlDB Server by using Confluent Control Center. For more information, see Control Center Configuration Reference.

Confluent Cloud Settings

You can connect ksqlDB Server to Confluent Cloud. For more information, see Connecting ksqlDB to Confluent Cloud.

ksqlDB Server Log Settings

To get DEBUG or INFO output from ksqlDB Server, configure a Kafka appender for the server logs. Assign the following configuration settings in the ksqlDB Server config file.

log4j.appender.kafka_appender=org.apache.kafka.log4jappender.KafkaLog4jAppender
log4j.appender.kafka_appender.layout=io.confluent.common.logging.log4j.StructuredJsonLayout
log4j.appender.kafka_appender.BrokerList=localhost:9092
log4j.appender.kafka_appender.Topic=KSQL_LOG
log4j.logger.io.confluent.ksql=INFO,kafka_appender

ksqlDB Processing Log Settings

The following configuration settings control the behavior of the ksqlDB Processing Log.

Note

To enable security for the KSQL Processing Log, assign log4j properties as shown in log4j-secure.properties.

ksql.logging.processing.topic.auto.create

Toggles automatic processing log topic creation. If set to true, ksqlDB automatically tries to create a processing log topic at startup. The name of the topic is the value of the ksql.logging.processing.topic.name property. The number of partitions is taken from the ksql.logging.processing.topic.partitions property , and the replication factor is taken from the ksql.logging.processing.topic.replication.factor property. By default, this property has the value false.

ksql.logging.processing.topic.name

If automatic processing log topic creation is enabled, ksqlDB sets the name of the topic to the value of this property. If automatic processing log stream creation is enabled, ksqlDB uses this topic to back the stream. By default, this property has the value <service id>ksql_processing_log, where <service id> is the value of the ksql.service.id property.

ksql.logging.processing.topic.partitions

If automatic processing log topic creation is enabled, ksqlDB creates the topic with number of partitions set to the value of this property. By default, this property has the value 1.

ksql.logging.processing.topic.replication.factor

If automatic processing log topic creation is enabled, ksqlDB creates the topic with number of replicas set to the value of this property. By default, this property has the value 1.

ksql.logging.processing.stream.auto.create

Toggles automatic processing log stream creation. If set to true, and ksqlDB is running in interactive mode on a new cluster, ksqlDB automatically creates a processing log stream when it starts up. The name for the stream is the value of the ksql.logging.processing.stream.name property. The stream is created over the topic set in the ksql.logging.processing.topic.name property By default, this property has the value false.

ksql.logging.processing.stream.name

If automatic processing log stream creation is enabled, ksqlDB sets the name of the stream to the value of this property. By default, this property has the value KSQL_PROCESSING_LOG.

ksql.logging.processing.rows.include

Toggles whether or not the processing log should include rows in log messages. By default, this property has the value false.

ksqlDB-Connect Settings

ksql.connect.url

The Connect cluster URL to integrate with. If the Connect cluster is running locally to the ksqlDB Server, use localhost and the configuration port specified in the Connect configuration file.

ksql.connect.worker.config

The connect worker configuration file, if spinning up Connect alongside the ksqlDB server. Don't set this property if you're using an external ksql.connect.url.

ksql.connect.polling.enable

Toggles whether or not to poll connect for new connectors and automatically register them in ksqlDB.

Recommended ksqlDB Production Settings

When deploying ksqlDB to production, the following settings are recommended in your /etc/ksqldb/ksql-server.properties file:

# Set the batch expiry to Integer.MAX_VALUE to ensure that queries will not
# terminate if the underlying Kafka cluster is unavailable for a period of
# time.
ksql.streams.producer.delivery.timeout.ms=2147483647

# Set the maximum allowable time for the producer to block to
# Long.MAX_VALUE. This allows ksqlDB to pause processing if the underlying
# Kafka cluster is unavailable.
ksql.streams.producer.max.block.ms=9223372036854775807

# Configure underlying Kafka Streams internal topics to achieve better
# fault tolerance and durability, even in the face of Kafka broker failures.
# Highly recommended for mission critical applications.
# Note that a value of 3 requires at least 3 brokers in your Kafka cluster.
ksql.streams.replication.factor=3
ksql.streams.producer.acks=all
ksql.streams.topic.min.insync.replicas=2

# Set the storage directory for stateful operations like aggregations and
# joins to be at a durable location. By default, they are stored in /tmp.
# Note that the following path must be replaced with the actual path.
ksql.streams.state.dir=</some/non-temporary-storage-path/>

# Bump the number of replicas for state storage for stateful operations
# like aggregations and joins. By having two replicas (one main and one
# standby) recovery from node failures is quicker since the state doesn't 
# need to be rebuilt from scratch. This configuration is also essential for
# pull queries to be highly available during node failures.
ksql.streams.num.standby.replicas=1

For more information, see the ksql-production-server.properties example file.

---

Last update: 2020-11-24